TM 55-1520-240-PM PHASE NO. _____ Area Name and No. Aircraft Serial No. Date AFT ROTOR AND PYLON, AREA #6 Inspect Phase No’s Inspection Requirements Status Faults and/or Remarks Action Taken Initial ALL/C 6.38 Work platforms, access doors, fairings and panels for damage, twisting, cracks, delamination, and corrosion. Latches and latch plates for condition, security, and closed latched. Seals and chafing strips for security and deterioration. Support cables and straps for wear, cuts, and fraying. Clam shell door latch pins for wear. Access 1, 2, 3, 4, 5, 6, 7, 8, 9, 40, 41, 42, 44, 45, 46, 47, 48, 49, 50, 51, 52, 56 ALL/C 6.39 Aft pylon area for structural damage, skin cracks, dents, buckling, loose or missing rivets, and evidence of corrosion. Paint for chipping and peeling.  Stencils and decals for condition. 1, 3, C 6.40 Inspect and lubricate rod end bearings located in the aft pylon and aft fuselage. ALL/C 6.41 Replace combining transmission cooling fan drive shaft nonmetallic spline adapter (combining transmission adapter only). "FOD REMINDER" Check work area for tools and parts after completion of maintenance and inspection. 2-43