14-1.3 CARGO/RESCUE WINCH SYSTEM VISUAL CHECK (Continued)
Check CABLE CUTTER and HOIST
CONTROL receptacles (6 and 7).
Pull down cover and check CABLE CUT-
TER receptacle (8).
Check winch operators grip (9) and ca-
Check HOIST CONTROL receptacle
Check HOIST/CARGO HOOK panel
If either receptacle or wiring to receptacle (6 or 7)
is damaged, repair or replace as required,
If receptacle (8) is damaged; replace it.
If grip (9) is cracked or cable (10) is cut exposing
wires, replace it.
If receptacle (11) is damaged, replace it. If recep-
tacle dust cover IS damaged or missing, replace it,
If knob (13) is loose or damaged, tighten or re-
place as required. If switchguard (14) is loose or
damaged, tighten or replace as required. If switch
(15 or 16) is loose or damaged, replace HOIST/
CARGO HOOK panel (12).
END OF TASK