• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
EXTERNAL CARGO HOOK SYSTEM WIRING DIAGRAM (Continued)
EXTERNAL  CARGO  HOOK  SYSTEM  VISUAL  CHECK (Continued) - TM-55-1520-240-T-3_842

TM-55-1520-240-T-3 CH-47D Heilcopter Manual
Page Navigation
  758    759    760    761    762  763  764    765    766    767    768  
TM 55-1520-240-T 16-1.3  EXTERNAL CARGO HOOK SYSTEM VISUAL CHECK 16-1.3 INITIAL SETUP Applicable Configurations: References: All TM 55-1520-240-23 Tools: Aircraft Mechanic's Tool Kit.   Equipment Condition: NSN 5180-00-323-4692 TM 55-1520-240-23: Battery Disconnected Materials: Electrical Power Off None Hydraulic Power Off Center Cargo Hook Access Panel Open Personnel Required: Center Cargo Hook Unstowed 67U20 Medium Helicopter Repairer Center Tunnel Cover Open TASK RESULT 1. Check forward cargo hook (1).   If load beam (2) is open, close it.  If it does not stay closed check rigging of tandem hook release rig- ging.  Adjust as required (TM 55-1520-240-23).  If rigging is okay and load beam is still open, replace cargo hook.  If control assembly (3) is damaged, re- place it.  If keeper (4) is damaged, replace it.  If wire harness (5) is damaged replace it.  If window (6) is 2. Repeat step (1) for aft cargo hook (7). damaged, replace it. 3. Check center cargo hook (8). If hook (9) is open, close it.  If it does not stay closed service cargo hook actuator and check manual release cams (TM 55-1520-240-23).  If hook still can not be closed, replace cargo hook (8).  If keeper (10) is forward of hook (9) or damaged, adjust or replace it.  If release mechanism (11) is damaged, replace it.  If wire harness or hydraulic hose (12 or 13) is damaged. replace it. GO TO NEXT PAGE 16-6







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.