TM 55-1680-358-12&P
Table 2-7. Wheeled Vehicle Configurations - Continued
Configuration
Component
Comment
Flight
Outboard Rail/Roller Assemblies,
----
Stations 158.500 to 274.000 (1 and
2, Figure 3-2), Stations 272.531
to 374.000 (3 and 4) and Stations
373.469 to 487.000 (5 and 6)
Inboard Center Guide Rails (5 and 21,
----
Figure 3-7; 65 and 68, Figure 3-8;
37 and 39, Figure 3-9; and 53 and
74, Figure 3-10)
Ramp Support Assemblies (19, Figure
Stow in Helicopter
3-2)/Ramp Extension Support Assem-
blies (18, Figure 3-2)
Ramp Extension/Ramp Extension Roller
Rotate Ramp Extension on
Assemblies (15)
Ramp, Roller Assem-
blies on Underside
Pallet Lock Assemblies (62, Figure
----
3-3 and 30, Figure 3-4)
Retractable Flange Assemblies (43,
----
Figure 3-5)
5k Tiedown Fitting Assemblies (21,
----
Figure 3-2) and 10k Fitting
Assemblies (22)
Ramp Guide Rail/Roller Assemblies
----
(7 and 8, Figure 3-2)
Unload
Outboard Rail/Roller Assemblies,
----
Stations 158.500 to 274.000 (1 and
2, Figure 3-2), Stations 272.531
to 374.000 (3 and 4) and Stations
373.469 to 487.000 (5 and 6)
Inboard Center Guide Rails (5 and 21,
----
Figure 3-7; 65 and 68, Figure 3-8;
37 and 39, Figure 3-9; and 53 and
74, Figure 3-10)
Ramp Support Assemblies (19, Figure
Ramp on Ground
3-2)/Ramp Extension Support Assem-
blies (18, Figure 3-2)
Ramp Extension/Ramp Extension Roller
Ramp Extension on Ground
Assemblies (15)
Pallet Lock Assemblies (62, Figure
----
3-3 and 30, Figure 3-4)
Retractable Flange Assemblies (43,
----
Figure 3-5)
5k Tiedown Fitting Assemblies (21,
----
Figure 3-2) and 10k Fitting
Assemblies (22)
Ramp Guide Rail/Roller Assemblies
----
(7 and 8, Figure 3-2)
NOTE
Maximum available width with outboard rail/roller assemblies in stowed position is 85 inches
lateral width
2-41
