TM 1-1520-240-MTF
2-28
BEFORE STARTING ENGINES (CONT.)
B 3. Shoulder harness locks — Check inertia reel
functions properly (i.e., the shoulder harness
should lock automatically when given a sharp
pull).
B* 4. NO. 1 and NO. 2 power distribution panels —
Check all circuit breakers and gang bar up.
Check for clearance between gang bar and
cover. Check dust and water protection boot for
condition and security.
5. Mirror — Adjust.
6. FAT gage — Check FAT, condition, and security.
B* 7. Overhead switches and control panels, set as
follows:
O a. EAPS ENG 1 and ENG 2 FAN switches —
OFF. DOORS — Close.
b. EXT LTG switches — As required.
c. CPLT LTG switches — As required.
d. COMPASS switch — As required.
e. TROOP WARN switches — OFF.
f. HTG switches — As required.
g. W/S WIPER switch — OFF.
h. ELECT switches — OFF.
i. LTG switches — As required.
j. FUEL CONTROL switches — Set as
follows:
(1) XFEED switch — CLOSE.
(2) REFUEL STA switch — OFF.
(3) ALL FUEL PUMPS switches — OFF.
k.
712 START switches — OFF.
l. ENG COND levers — STOP.
