AFCS CONTROL PANEL VISUAL CHECK

AFCS CONTROL PANEL FAILS SYSTEMS SELECT TEST

TM-55-1520-240-T-3 CH-47D Heilcopter Manual
Page Navigation
420

TM 55-1520-240-T 11-4.2 AFCS CONTROL PANEL VISUAL CHECK INITIAL SETUP Applicable Configurations: All Tools: Electronic Repairer’s Tool Kit, NSN 5180-00-064-5178 Multimeter Materials: None Personnel Required: 35M20 Avionic Navigation and Flight Control Equipment Repairer. References: TM 55-1520-240-23 Equipment Condition: AFCS Control Panel Disconnected From AFCS Bench Test Set AFCS Control Panel Rear Cover Removed TASK RESULT 1. Check pins in receptacles (1 and 2). If any pin is bent, straighten it. If any pin is broken, corroded, or burnt, replace it. 2. Check switches (3 thru 9). If any switch is loose or damaged, tighten or re- place it as required. If knob on switch (6) is loose, tighten or replace it. 3. Check panel wires. If any wire termination is loose, tighten it. If any wire is damaged, replace it. FOLLOW-ON MAINTENANCE: None 11-4.2 END OF TASK 11-193

Privacy Statement
Press Release
Contact