Figure 4-5. Link, Chain, Detachable Installation

TM-1-1500-250-23 Aircraft Tie-down and Mooring Procedures Manual
Page Navigation
23

TM 1-1500-250-23 1. Bring the two Hammerlok coupling link body halves together as shown. 2. Place the stud assembly and the special load pin made from hardened alloy steel in place as shown. Drive the load pin in until the end of the pin is flush with the surface of the body forging. Figure 4-5. Link, Chain, Detachable Installation 4-8

Privacy Statement
Press Release
Contact