TM 55-1520-240-PM PHASE NO. _____ Area Name and No. Aircraft Serial No. Date RIGHT FUSELAGE AREA #3 Inspect Phase No’s Inspection Requirements Status Faults and/or Remarks Action Taken Initial ALL/C 3.8 Remove, clean, inspect, and repack aft landing gear wheel bearings. ALL 3.9 Aft landing gear wheel for cracks and corrosion. Paint for chipping or peeling. Bolts for torque and sealant. ALL 3.10 Axle housing retaining bolts (2) for security and corrosion. Interior area of spindle for corrosion and for paint chipping and peeling. ALL 3.11 Aft landing gear strut for leaks, cleanliness of exposed piston, normal extension (visual). ALL 3.12 Aft landing gear support structure for buckling, cracks, corrosion, loose or missing fasteners. ALL/C 3.13 Aft landing gear drag links for security, corrosion, cracks, nicks, dents, twisting, and displacement of bearings from bores. All surfaces of lower drag link for cracks, with particular attention to area around forward trunnion anti-rotation bolt hole. Access 17 "FOD REMINDER" Check work area for tools and parts after completion of maintenance and inspection. 2-13