TM 55-1520-240-PM PHASE NO. _____ Area Name and No. Aircraft Serial No. Date COCKPIT AREA #10 Inspect Phase No’s Inspection Requirements Status Faults and/or Remarks Action Taken Initial ALL/C 10.12 Pallet mounted dampers, actuators, links, linear variable differential transducers (LVDTs), springs, spring capsules, detent capsule, and droop potentiometer for security, evidence of interference, and damage.  Structural pallets for security, delamination, damage, and threaded inserts that are displaced from their normal position. Electrical connectors and wiring for security and chafing. ALL 10.13 Dynamic absorbers for security. Support structure for distortion, cracks, and loose or missing hardware. ALL/C 10.14 Dash actuator and connectors for security. ALL/C 10.15 Flight control links in lower closet area for damage, corrosion, cracks, and security. Inspect yaw, thrust, roll, and pitch ILCA intermediate connecting links for cracks or displaced bearings. "FOD REMINDER" Check work area for tools and parts after completion of maintenance and inspection. 2-71