TM 55-1520-240-T
4-11.2 GAS PRODUCER CONTROL SYSTEM VISUAL CHECK
4-11.2
INITIAL SETUP
References:
Applicable Configurations:
TM 55-1520-240-23
With 74
Equipment Condition:
Tools:
TM 55-1520-240-23:
Electrical Repairer's Tool Kit,
Battery Disconnected
NSN 5180-00-323-4915
Electrical Power Off
Materials:
Hydraulic Power Off
None
Personnel Required:
Aircraft Electrician
TASK
RESULT
1.
Check ENGINE CONDITION control quadrant (1).
If quadrant is loose or damaged, tighten or replace it as
required. If levers (2 or 3) are damaged, replace quadrant.
2.
Check DECU No. 1 (4).
If DECU NO. 1 (4) is loose or damaged, tighten or replace
it as required. If wiring or electrical connectors to DECU
NO. 1 are damaged, repair or replace as required.
3.
Check DECU No. 2 (5).
If DECU NO. 2 (5) is loose or damaged, tighten or replace
it as required. If wiring or electrical connectors to DECU
NO. 2 are damaged, repair or replace as required.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
4-250 Change 17
