TM 55-1520-240-T
7-1.3 FLIGHT CONTROL HYDRAULIC SYSTEM VISUAL CHECK (Continued)
TASK
RESULT
7. Check No. 1 flight control hydraulic
pump (7).
8. Check No. 1 flight control lower controls
module (8).
9. Check No. 2 flight control lower controls
module (10).
10. Check ingrated lower control actuators
(12, 13, 14, and 15).
11. Check two jam sensors on each actua-
tor (12, 13, 14, 15).
If pump (7) is loose or damaged, tighten or replace
it as required, If any hose to pump is loose or
damaged, tighten or replace it as required.
If module (8) is loose or damaged, tighten or re-
place it as required. If any tube to module is loose
or damaged, tighten or replace it as required. If
solenoid (9) is damaged, replace it. If connector to
solenoid is loose or damaged, tighten or replace it
as required. If wiring to connector is damaged,
repair or replace it as required.
If module (10) is loose or damaged, tighten or re-
place it as required. If any tube to module is loose
or damaged, tighten or replace it as required. If
solenoid (11) is damaged, replace it. If connector
to solenoid is loose or damaged, tighten or replace
it as required. If wiring to connector is damaged,
repair or replace it as required.
If any actuator (12, 13, 14, or 15) is loose or
damaged, tighten or replace it as required.
If any jam sensor button (16) is extended, go to
task 7-1.5.
7 - 1 .3
GO TO NEXT PAGE
7 -9
