T R A N S M I S S I O N O I L T E M P E R A T U R E I N D I C A T I N G A ND WARNING SYSTEM VISUAL CHECK (Continued)

TRANSMISSION OIL TEMPERATURE INDICATING 8-10.2 WARNING SYSTEM VISUAL CHECK

T R A N S M I S S I O N O I L T E M P E R A T U R E I N D I C A T I N G A ND W A R N I N G S Y S T E M O P E R A T I O N A L C H E CK

TM-55-1520-240-T-2 CH-47D Heilcopter Manual
Page Navigation
263

TM 55-1520-240-T 8 - 1 0 . 2 T R A N S M I S S I O N O I L T E M P E R A T U R E I N D I C A T I N G A ND WARNING SYSTEM VISUAL CHECK (Continued) TASK RESULT 1. Check TRANSMISSION TEMP indica- If indicator (1) is loose or damaged, tighten or re- tor (1). place it as required. 2. Check TRANSMISSION TEMP switch If switch (2) is loose or damaged, tighten or re- (2). place it as required. 3. Check five OVERTEMP indicators (3). If any indicator (3) is loose or damaged, tighten or replace it as required. CHECK FORWARD TRANSMISSION OIL TEMPERATURE INDICATING AND WARNING SYSTEM INSTALLATION 4. Check temperature probe (4). If probe (4) is damaged, replace it. If wiring or electrical connector to probe is damaged, repair or replace as required. CHECK AFT TRANSMISSION OIL TEMPERATURE INDICATING AND WARNING SYSTEM INSTALLATION 5. Check temperature probe (5). If probe (5) is damaged, replace it. If wiring or electrical connector to probe is damaged, repair or replace it as required. CHECK COMBINING TRANSMISSION OIL TEMPERATURE INDICATING AND WARNING SYSTEM INSTALLATION 6. Check temperature probe (6). If probe (6) is damaged, replace it. If wiring or electrical connector to probe is damaged, repair or replace it as required. CHECK NO. 1 (LEFT) ENGINE TRANSMISSION OIL TEMPERATURE INDICATING AND WARNING SYSTEM INSTALLATION 7. Check temperature probe (7). If probe (7) is damaged, replace it. If wiring or electrical connector to probe is damaged, repair or replace it as required. 8. Check temperature and chip detector (8). If detector (8) is damaged, replace it. If wiring or electrical connector to detector is damaged, repair or replace it as required. 8 - 1 0 . 2 TASK RESULT CHECK NO. 2 (RIGHT) ENGINE TRANSMISSION OIL TEMPERATURE INDICATING AND WARNING SYSTEM INSTALLATION 9. Check temperature probe (7). If probe (7) is damaged, replace it. If wiring or electrical connector to probe is damaged, repair or replace it as required. 10. Check temperature and chip detector (8). If detector (8) is damaged, replace it. If wiring or electrical connector to detector is damaged, repair or replace it as required. FOLLOW-ON MAINTENANCE: None END OF TASK 8 - 2 19

Privacy Statement
Press Release
Contact