TM 55-1520-240-T8 - 1 2 . 2 C R U I S E G U I D E I N D I C A T I N G S Y S T E M V I S U A L C H E C K(Continued)TASKRESULT1.2.3.4.5.6.Check CGI TEST switch (1).If switch (1) is loose or damaged, tighten or re-place it as required.Check cruise guide indicator (2).If indicator (2) is damaged, replace it.Check signal conditioner (3).If conditioner (3) is loose or damaged, tighten orreplace it as required. If wiring or connector toconditioner is damaged, repair or replace as re-quired.Check forward longitudinal cyclic trimIf boot (5) or wire harness (6) is damaged, replaceconnecting link (4).link (4).Check signal processor (7).If processor (7) is loose or damaged, tighten or re-place it as required. If wiring or connector toprocessor is damaged repair or replace it as re-quired.Check aft longitudinal cyclic trim con-If boot (5) or wire harness (6) is damaged, replacenetting link (8).link (8).FOLLOW-ON MAINTENANCE:TM 55-1520-240-23:Close pylon left workplatformClose left and right forwardwork platform8 - 1 2 .2END OF TASK8-299
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business