TM 55-1560-307-13&P
(1) CAGE Column. The Commercial and
Government Entity (CAGE) is a 5-digit numeric code used
to identify the manufacturer, distributor, or Government
agency, etc. , that supplies the item.
(2) PART NUMBER Column. Indicates the
primary number used by the manufacturer (individual,
firm, corporation, or Government activity), which controls
the design and characteristics of the item by means of its
engineering drawings, specifications standards, and
inspection requirements to identify an item or range of
items.
(3) STOCK NUMBER Column. This column
lists the NSN for the associated part number and
manufacturer identified in the PART NUMBER and CAGE
columns to the left.
(4) FIG. Column. This column lists the
number of the figure where the item is identified/located
in Section II and III.
(5) ITEM Column. The item number is that
number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
c. FIGURE AND ITEM NUMBER INDEX.
(1) FIG. Column. This column lists the
number of the figure where the item is identified/located
in Section II and III.
(2) ITEM Column. The item number is that
number assigned to the item as it appears in the figure
referenced in the adjacent figure number column.
(3) STOCK NUMBER Column. This column
lists the NSN for the item.
(4) CAGE Column. The Commercial and
Government Entity (CAGE) is a 5-digit numeric code used
to identify the manufacturer, distributor, or Government
agency, etc. that supplies the item.
(5) PART NUMBER Column. Indicates the
primary number used by the manufacturer (individual,
firm, corporation, or Government activity), which controls
the design and characteristics of the item by means of its
engineering drawings, specifications standards, and.
inspection requirements to identify an item or range of
items.
C-5. SPECIAL INFORMATION . Use the following
subparagraphs as applicable:
a. USABLE ON CODE. The usable on code
appears in the lower left corner of the Description column
heading. Usable on codes are shown as "UOC: . . . in
the Description Column (justified left) on the first line
applicable item description/nomenclature. Uncoded items
are applicable to all models. Identification of the usable
on codes used in the RPSTL are:
Code
Used On
PAA
Model M114
PAB
Model M114A
PAC
Model M114B
(These codes and model numbers are examples only.)
b. FABRICATION INSTRUCTIONS. Bulk materials
required to manufacture items are listed in the Bulk
Material Functional group of this RPSTL. Part numbers
for bulk materials are also referenced in the description
column of the line item entry for the item to be
manufactured/fabricated. Detailed fabrication instructions
for item source codes to be manufactured or fabricated
are found in TM 55-1560-307-13&P.
c. ASSEMBLY INSTRUCTION. Detailed assembly
instructions for items source coded to be assembled from
component spare/repair parts are found in TM 55-1560-
307-13&P. Items that make up the assembly are listed
immediately following the assembly item entry or
reference is made to an applicable figure.
C-6