TM 1-1520-240-MTF
4-60
q. Set Data switch to MSN. Open line three
and enter an arrow (²) in front of Doppler
Only (DOP ONLY). Ensure that an arrow is
also in front of GPS ONLY on line four.
GPS/DOP
(GPS/Doppler)
mode
of
operation is selected.
r. Set Data switch to DIS-TG, WP mode.
While still hovering CP-1, open line 1 and
select CP-2. Record distance and bearing to
CP-2 (lines 2 and 4). Slew (µ) down to Page
2 and record slant range destination (Line
2).
s. With Data switch still set to DIS-TG, switch
to destination mode and fly from CP-1 to
CP-2. While hovering over CP-2, record
displayed present position at CP-2 by
performing the following: Depress the
MARK key. Press line select key 3 to store
coordinates and altitude. This will be Mark
“B”. Press the Clear key (CLR) to return to
original screen.
t. Set Data switch to POS and record the
present position coordinates.
u. Set Data switch to DIS-TG, WP mode.
While still hovering over CP-2, open line 1
and select CP-1. Record distance and
bearing to CP-1 (lines 2 and 4). Slew (µ)
down to Page 2 and record slant range to
destination (line 2).
v. With Data switch still set to DIS-TG, switch
to destination mode and fly from CP-2 back
to CP-1. While hovering over CP-1, store
displayed present position at CP-1 by
performing the following: Depress the
MARK key. Press line select key 3 to store
coordinates and altitude. This will be Mark
“B”. Press the Clear key (CLR) to return to
original screen.
