TM 55-1520-240-T
8-6.2.1 TORQUE INDICATING SYSTEM VISUAL CHECK (Continued)
8-6.2.1
TASK
RESULT
1. Check No. 1 engine torque signal processor/power supply (1).
2. Check No. 2 engine torque signal processor/power supply (2).
3. Check pilot torquemeter indicator (4).
4. Check copilot torquemeter indicator (5).
5. Check No. 1 engine torquemeter junction box (6).
6. Check No. 2 engine torquemeter junction box (6).
If No. 1 engine torque signal processor/power supply
(1) is loose or damaged, tighten or replace it as
required. If connectors (3) are loose or damaged,
tighten or replace as required. If wires to connectors
(3) are damaged, repair or replace them as required.
If No. 2 engine torque signal processor/power supply
(2) is loose or damaged, tighten or replace it as
required. If connectors (3) are loose or damaged,
tighten or replace as required. If wires to connectors
(3) are damaged, repair or replace them as required.
Tighten or replace torquemeter indicator (4) and/or its
connector if loose or damaged.
Tighten or replace torquemeter indicator (5) and/or its
connector if loose or damaged.
If No. 1 engine torquemeter junction box (6) is loose or
damaged, tighten or replace it as required. If connector
to junction box is loose or damaged, tighten or replace
it as required. If wires to junction box (6) connector are
damaged,
repair
or
replace
them
as
required
(TM 1-2840-26523).
If No. 2 engine torquemeter junction box (6) is loose or
damaged, tighten or replace it as required. If connector
to junction box is loose or damaged, tighten or replace
it as required. If wires to junction box (6) connector are
damaged,
repair
or
replace
them
as
required
(TM 1-2840-26523).
FOLLOW-ON MAINTENANCE:
TM 55-1520-240-23:
No. 1 engine work platform closed.
No. 1 engine upper and lower access door closed.
No. 2 engine work platform closed.
No. 2 engine upper and lower access door closed.
END OF TASK
Change 19 8-105
