TM 55-1520-240-T
14-1.3 CARGO/RESCUE WINCH SYSTEM VISUAL CHECK
14-1.3
Personnel Required:
INITIAL SETUP
67U10 Medium Helicopter Repairer
Applicable Configurations:
References:
All
TM 55-1520-240-23
Equipment Condition:
Tools:
Aircraft Mechanic’s Tool Kit,
TM 55-1520-240-23:
Battery Disconnected
NSN 5180-00-323-4692
Electrical Power Off
Hydraulic Power Off
Materials:
None
Heater Compartment Acoustic
Blanket Removed
Cable Cutter Inspected
TASK
RESULT
1. Check shutoff valve (1).
If valve (1) is loose or damaged, tighten or replace
it as required. If hydraulic tubes to valve are loose
2. Check winch control valve (2).
3.
4.
or damaged, tighten or replace them as required. If
electrical connector or wires to valve are
damaged, repair or replace as required.
If valve (2) is loose or damaged, tighten or replace
it as required. If hydraulic tubes to valve are loose
or damaged, tighten or replace them as required. If
electrical connecter or wires to valve are
damaged, repair or replace as required.
Check hydraulic tubes and components
If any hydraulic tube or component is loose or
between winch control valve (2) and
damaged, repair or replace as required.
winch (3).
Check winch (3).
If winch (3) is loose or damaged, tighten or re-
place it. If brake (4) is loose or damaged, tighten
or replace it as required. If winch motor (5) is
loose or damaged, tighten or replace it as re-
quired. If connector or wires to winch are
damaged repair or replace as required.
14-4
GO TO NEXT PAGE
