TM 55-1680-358-12 & P
2-16. System Stowage. Stow the Helicopter Internal
Cargo Handling System as follows:
a.
Flip up the outboard rail/roller assemblies,
stations 158.500 to 274.000 (1 and 2, Figure 3-2),
stations 272.531 to 374.000 (3 and 4), and stations
373.469 to 487.000 (5 and 6). Secure them to the seat
support tube as shown in Figure 2-22. Refer to Figures
2-34 and 2-35 for the stowage location of cargo system
components.
b.
Secure loading pole, using outboard rail/roller
assemblies, stations 158.500 to 274.000 (1 and 2,
Figure 3-2), stations 272.531 to 374.000 (3 and 4), and
stations 373.469 to 487.000 (5 and 6). Strap between
seat support tube and top of buffer board (Figure 2-35).
Locate between station 300.000 and station 400.000 on
right-hand side of aircraft.
c.
Stow two extension jack stands on aircraft frame
on the left-hand side aft of Station 534 above ramp area
using two pins provided for this purpose.
d.
Stow ramp support stand on aircraft frame on
the right-hand side aft of Station 534 above ramp area
using two pins provided for this purpose.
2-57/(2-58 Blank)
