Table 8-13. Startup/Shutdown Check Summary

TM-55-6930-212-10 Pyrometer and Thermocouple Tester Field Type N-3A Manual
Page Navigation
154

TI TM 55-6930-212-10 Table 8-13. Startup/Shutdown Check Summary - Continued Location Check Shutdown - continued Seat belts Off after MOTION OFF indicator lights PRINT PLOT Depressed as required IOS CRT (INT) Intensity OFF DATA CLEAR As required Forms Enter data as required 8-113. INITIALIZATION TO AN IC SET. 8-114. To initialize an IC set. dial required IC number (001 through 010) into 3-digit thumbwheel selector on CRT index display and depress INSERT switchlight. During initialization. FREEZE indicators blink until aircraft arrives at preselected steady-state condition. 8-115. During a training problem, the CRT displays current values for 12 flight parameters. These consist of altitude, airspeed, heading, roll angle, pitch angle, trim (yaw), vertical velocity, engine torque (each engine), rotor rpm. rate of turn, and fuel quantity. Any parameter can be frozen using the keyboard. (See table 8-10.) 8-116. Environmental conditions parameters (see CRT page 020. figure 8-11) also display current values that can be changed during training using the keyboard. Parameters that can be varied are fuel quantity, longitude, latitude, center of gravity, gross weight, sea-level barometric pressure, sea-level outside air temperature, wind velocity and direction, environmental sound level, turbulence level, and gaming area weather. Ground power and seat shaker can be selected or deselected. 8-117. Visual condition parameters (see CRT page 021, figure 8-13, sheet 11) also display current values and can be changed using the keyboard. The parameters that can be varied are cloud thickness, ceiling, lighting (both ground and sky), field selection, viewpoint selection, and RVR. The remaining parameters are either ON/OFF control functions or noneditable and noted as such. 8-97

Privacy Statement
Press Release
Contact