TM 1-1520-240-CL
N-7
O 25. HUD — program as required.
LF* 26. 714A DECU PRESTART BIT — Perform.
27. 712 ENGINE BEEP TRIM switch (NO. 1 & 2) —
DECREASE for 8 seconds.
* 28. Ignition Lock switch — ON.
F* 29. Area — Clear for start.
O* 30. EAPS Fan switches — ON (delay 10-15
seconds between turning on No. 1 and No. 2).
LF* 31. 712 First engine — Start.
LF* 32. 714A First engine — Start.
LF* 33. Second engine — Start same as first.
* 34. Transmission oil pressures — Check.
* 35. ENG COND levers — FLT.
* 36.
712 RRPM — Set as required/ 714A
RRPM
— Check 100% 1%.
F* 37. Fluid drain lines — Check.
* 38. GEN 1 and 2 switches — ON. 712 No. 1 &
No. 2 GEN OFF 714A
GEN No. 1 & No. 2
caution capsules out (delay 2 seconds
between 1 and 2).
* 39. APU GEN switch — OFF.
LF* 40. 714A DECU START BIT — Perform.
* 41. PWR XFER 1 and 2 switches — OFF.
* 42. APU switch — OFF. APU ON
caution/advisory capsule out.
* 43. Systems — Check normal.
* 44. Transponder — STBY.
