TM 1-1520-240-MTF
2-35
STARTING ENGINES (CONT.)
b. FLOOD LTS selection switches on INST
PNL/OVHD PNL — ON.
c. Check following lights on:
(1) 6 under glareshield.
(2) 2 on overhead bulkhead (sta 95)
d. FLOOD LTS rotary control — Adjust
checking for proper response then OFF.
e. FLOOD LTS selection switches on INST
PNL/OVHD PNL — OFF.
9. Emergency Floodlights — Check as follows:
a. Pilot’s FLT INST LTS rotary control switch
— ON.
b. Check
(6)
emergency
lights
under
glareshield and (2) on overhead bulkhead
are on.
c. Pilot FLT INST LTS rotary control switch —
OFF.
10. PILOT and COPILOT utility lights — Check
rheostat operation.
11. Ground Power Unit — If required, connect GPU
for ground start. Check EXT PWR caution light
on.
BF* 12. Fire guard — Posted.
CAUTION
If a start results in a roar with flame in the
exhaust (hot or torching start), shut down the
APU by setting the APU switch to OFF.
