TM 55-1520-240-T8-1.3 PITOT STATIC SYSTEM VISUAL CHECK (Continued)TASKRESULT1. Check PITOT switch (1).2. Check NO. 1 AFCS computer static (2),pitot (3), left (4), and right (5) sideslipline and fittings.3. Check NO. 2 AFCS computer static (6),pitot (7), left (8), and right (9) sidesliplines and fittings.4. Check left and right yaw ports (10).5. Check left and right pitot masts (11).6. Check pitot static system drains (12).7. Check static ports (13).8. Check pilot’s and copilot’s airspeed indi-cators (14).9. Check pilot’s and copilot’s altimeters(15).10. Check pilot’s and copilot’s vertical speedindicators (16).If switch (1) iS loose or damaged, tighten or re-place as required.If lines are kinked or damaged, straighten or re-place them as required. If fittings are loose ordamaged, tighten or replace them as required.If lines are kinked or damaged, straighten or re-place them as required. If fittings are loose ordamaged, tighten or replace them as required.If holes in ports (10) are clogged or ports aredamaged, clean ports or replace them as required.If eithier pitot mast (11) is loose or damaged,tighten or replace it as required.If drains (12) are loose or damaged, tighten or re-place them as required.If holes in ports (13) are clogged, or ports aredamaged, clean parts or replace them as required.If either Indicator (14) is loose or damaged tightenor replace it as requiredIf either altimeter (15) is loose or damaged,tighten or replace it as required.If either indicator (16) is loose or damagedtighten or replace it as required.FOLLOW-ON MAINTENANCENone8 - 1 .3END OF TASK8-5
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
