TM 55-1520-240-T
9-2.3 AC POWER SYSTEM VISUAL CHECK
9-2.3
INITIAL SETUP
References:
Applicable Configurations:
All
Equipment Condition:
TM 55-1520-240-23:
Tools:
Battery Disconnected
Electrical Repairer’s Tool Kit,
Electrical Power Off
NSN 5180-00-323-4915
Hydraulic Power Off
Left and Right Transmission
Materials:
Baffles Open
None
Left and Right Electrical
Compartment Access Doors Open
Personnel Required:
Cargo Ramp Open and Level
68F10 Aircraft Electrician
(Task 7-3 4)
TASK
RESULT
1.
Check GEN NO. 1, NO. 2, and APU
If any switch (1,2. or 3) is loose or damaged, tighten or
switches (1, 2, and 3).
replace it as required.
2.
Check apu generator control panel (4).
If panel (4) is loose or damaged, tighten or replace it as
required. If electrical connectors to panel are loose or
damaged. tighten or replace them as required. If wiring
to either connector is damaged, repair or replace it as
required.
3.
Check No. 2 generator control panel (5).
If panel (5) is loose or damaged. tighten or replace it as
required. If electrical connector to panel is loose or
damaged, tighten or replace it as required. If wiring to
connector is damaged, repair or replace it as required.
4.
Check No. 1 generator control panel (6).
If panel (6) is loose or damaged, tighten or replace it is
required. If electrical connector to panel is loose or
damaged, tighten or replace it as required. If wiring to
connector is damaged. repair or replace it as required.
5.
Check power monitor (7).
If monitor (7) is loose or damaged. tighten or replace it
as required. If electrical connector to monitor is loose or
damaged, tighten or replace it as required. If wiring to
connector is damaged, repair or replace it as required.
6.
Check AC power receptacle (8).
If receptacle (8) is loose or damaged, tighten or replace
it as required.
GO TO NEXT PAGE
Change 15 9-62.1/(9-62.2 blank)
