TM 55-6930-212-10
8-30. Creation of the demo flight is done in phases:
a.
Record demo flight by flying the simulator.
b.
Correct any errors in demo flight.
c.
Record audio briefing and commentary.
NOTE
Demo dynamics must be recorded before the audio is recorded.
8-31. RECORDING THE DEMONSTRATION FLIGHT.
8-32. Before starting the recording procedure, work out a detailed scenario of the flight, including instructor actions,
maneuver mark placements, and audio commentary.
NOTE
The demo playback repeats instructor station CRT display selection and interactions as well as
cockpit actions. Therefore, if particular displays are desired during the demo, they must be
selected during the demo recording.
8-33. Record demo flight dynamics as follows:
a.
Prepare simulator for flight.
b.
Place simulator in freeze mode.
c.
Depress DATA CLEAR switchlight.
d.
Set up cockpit to desired configuration.
e.
Initialize to desired starting point by using an existing IC or an edited IC or by flying simulator to desired starting
point.
f.
Select desired IOS displays.
g.
Select demo number to be recorded on IOS thumbwheels; i.e., 100, 110 ...290.
h.
Depress DEMO RECORD switchlight.
i.
Depress thumbwheel INSERT switchlight. If demo already exists, ENTRY ALREADY EXISTS message is
displayed. To delete demo and allow rerecording, depress INSERT switchlight again. While demo is being
deleted, WAIT message is displayed, followed by PROCEED WITH DEMO RECORD message. Clear message
by depressing CLEAR key on keyboard.
j.
Make a last check and prepare to fly simulator.
8-28
