TM 55-6930-212-10
e.
Depress FREEZE switchlight. Start flying demo from maneuver mark. Refly demonstration or add to it and
insert maneuver marks where planned, using MANEUV MARK switchlight as instructed in paragraph 8-33.
f.
Depress FREEZE switchlight.
g.
Depress thumbwheel DELETE switchlight. DEMO RECORD lamp extinguishes. Recording process is
terminated. Demo just recorded replaces previously recorded demo, starting at selected maneuver point. If
audio was already recorded, that must also be rerecorded, starting at selected maneuver point.
8-36. RECORDING THE AUDIO BRIEFING.
8-37. To record audio briefing, proceed as follows:
a.
Select CRT page 020. Edit environmental sound to zero to reduce background noise.
b.
Depress STUD MON and ICS switchlights at IOS.
c.
Set volume to a comfortable level.
d.
Select demo number (for which audio will be recorded) on IOS thumbwheels; i.e., 100, 110 ... 290.
e.
Depress thumbwheel INSERT switchlight. Simulator initializes to start of demo. FREEZE lamp blinks and then
goes steady. DEMO REPLAY ACTIVE message is displayed.
f.
Depress AUDIO RECORD ENABLE switchlight.
g.
Prepare to speak briefing.
h.
Depress DEMO BRIEF RECORD switchlight to start recording briefing.
i.
Speak briefing while keying microphone.
j.
Depress DEMO BRIEF RECORD switchlight to end recording of briefing. DEMO BRIEF RECORD and AUDIO
RECORD ENABLE lamps extinguish.
k.
Depress thumbwheel DELETE switchlight. DEMO REPLAY ACTIVE message disappears.
NOTE
Briefings are recorded in freeze.
8-38. RECORDING THE AUDIO COMMENTARY.
8-39. To record audio commentary, proceed as follows:
a.
If commentary is not recorded at the same time as briefing, repeat steps a. through d. in paragraph 8-37.
8-30
