TM 1-1520-240-MTF
2-48
STARTING ENGINES (CONT.)
B 41. 712 NO. 1 and NO. 2 ENGINE BEEP TRIM
switch — DECREASE for 8 seconds.
42. Ignition Lock — ON.
BF* 43. Area — Clear for start.
NOTE
If the start is not normal, abort it. If a second start
is attempted, wait at least 15 seconds after N1
tachometer indicates zero before starting. This will
allow sufficient time for fuel to drain out of the
combustion chamber.
CAUTION
Sand and debris within the EAPS will be
ejected when the EAPS fan is operating.
Personnel shall stand clear of the exhaust
when fan is turned on.
NOTE
The EAPS fans have high start up electrical power
requirements. To prevent an overload, the fans
must be turned on one at a time. The first fan must
be allowed to stabilize for 10-15 seconds before
the second fan is turned on.
BO* 44. EAPS FAN NO. 1 and NO. 2 switches — ON,
(one at a time). Allow first fan to stabilize for
10-15 seconds before the second fan is turned
on.
