TM 1-1520-240-MTF
4-19
2. Second engine — Start by using the same
method as first engine.
H. 714A NO. 1 AND NO. 2 ENGINE START
Reference:
TM 1-1520-240-10
NOTE
Either engine may be started first.
CAUTION
The flight controls must be manned anytime
the helicopter is on the ground with the rotors
turning.
CAUTION
If no oil pressure is indicated during the start-
ing sequence, shut down engine and investi-
gate.
1-33.
1. First engine — Start as follows:
a. L FUEL PUMP MAIN switches — ON.
Check L FUEL PRESS caution capsule out.
b. XFEED switch — OPEN. Check R FUEL
PRESS caution capsule out.
c. ENG COND lever — GND.
d. FADEC ENG 1 and FADEC ENG 2 switch —
PRI.
e. FADEC ENG START switch — Select first
engine to be started and hold until N1
accelerates to 10%. Release switch.
f. Check and record engine oil pressure (5 PSI
minimum).
